OVERPRESSURE RELIEF VALVE
Pressure relief valves, also called relief valves or safety valves, are a mechanism that allows maintaining the pressure of liquids or gases within the pre-established limits within the regulations, the manufacturer or the specific industry where they are installed. Its mission is to prevent an explosion or failure in the protected system, pipeline or equipment that is protected by it due to excess pressure or temperature rise. These valves can be found in commercial, industrial and / or domestic facilities. In general terms, they must be installed in facilities where they circulate or contain fluids subjected, at times, to inadmissible pressures.
Pressure relief valves are also used to control processes, in these cases the valves act by sending the fluids to certain places depending on the system pressure.
At CMC Fire Solutions we have a variety of valve models with different certifications and approvals.
FP 430UF
The FP 430-UF Model is pilot operated and is in charge of preventing overpressure, maintaining the preset pressure in the system constantly, regardless of fluctuating demands.
UL Listed (up to 175 psi) and FM Approved in accordance with NFPA-20. The valve offers reliable performance in: refineries, petrochemical complexes, tank farms, high-rise buildings, aviation, marine and onshore facilities.
FP 730UF
The Model FP 730-UF is pilot operated and is responsible for preventing overpressure, maintaining the preset pressure in the system constantly, regardless of fluctuating demands.
UL Listed (up to 350 psi) and FM Approved in accordance with NFPA-20. The valve offers reliable performance in: refineries, petrochemical complexes, tank farms, high-rise buildings, aviation, marine and onshore facilities.
E 100G/2100G
The Model 100G / 2100G is designed for use in controlling the flow of water to deluge, pre-action, or foam fire protection sprinkler systems.
This valve is UL Listed in Class I Special Systems Water Control Valves (VLFT) regularly in vertical and horizontal installation applications. Likewise, it is UL / ULC listed to operate both manually, electronically, with a hydraulic or pneumatic pilot control system for a wet pilot line of sprinklers.
The Model 100G / 2100G is a hydraulically operated, diaphragm actuated globe or angle pattern deluge valve. It has three main components: the body, the cover, and the diaphragm assembly. The moving part of this model is the diaphragm assembly.
The no-packaging construction and simple design at CMC Fire Solutions make sure to extend the useful life of this product, with minimal maintenance and high reliability. Likewise, all the ferrous parts of the valve are coated with epoxy fusion resin internally and externally to give it more resistance to corrosion.
E 134-05
Model E134-05 is a 3- to 12-inch size, UL / ULC Listed, Solenoid Operated Deluge Valve. It has a fast acting solenoid control. It has a reliable drip closure, simple design, proven and reliable. It is easy to install and low maintenance.
The Model E 134-05 Solenoid Control Valve is an on-off control valve that closes your herothorder once it receives an electrical signal to the solenoid control. The main valve is supplied normally open (de-energize solenoid to open) or normally closed (activate solenoid to open).